Piecemaker - Briggs & Stratton 850 Series engine
The Piecemaker will shred ...
NewsPaper and Cardboard
Leaves and Branches
Mill sunflower seed/carrots for stock feed
The Piecemakers performance will amaze you. Before you buy any chipper shredder be sure that you see a Piecemaker in action. Take some of your toughest material to your Greenfield dealer for a practical demonstration. He will be pleased to show you.
Easy to maintain
The powerful engine drives the cutter disc and blades directly and there are many benefits.
The engine crankshaft is securely attached to a massive drive boss 35mm in diameter which supports the engine crankshaft for its full length.
Simple and durable
The 70mm chipper tube feeds branches etc., directly on to the high speed outer edge of the cutter disc.
The large hopper feeds directly onto the slower running inner of the same disc. The two chipper blades perform the function of both chipping and shredding.
Garden material fed into the hopper is cut into 4-5mm thick pieces.
If finer mulch is needed, simply re-feed it into the hopper.
Large impeller blades of a special shape are fitted to the cutter disc to create a vacuum in the base of the hopper.
Also the air drawn into the hopper is in the form of a flat air wave.
The discharge chamber opens up like a clam, just undo two bolts and swing the hopper back.
All cutting parts are then visible and easily accessible.
The two chipper blades, can be removed and turned over for a new lease of life. The chipper blades are special tough, high carbon steel.
Chipper disc is of a special semi high tensile steel and carefully balanced. Hopper is made from zinc coated steel (not plastic). It won't rust or crack with normal use and is unaffected by U.V. rays.
Chassis. All steel and rigid with a heavy powder coat finish. Metal parts are chrome or zinc plated.
One year warranty against faulty workmanship and material for domestic use in recommended conditions.
Long life all metal construction no plastics
Compact design for ease of manoeuvrability and storage
Only one moving part means less maintenance and ease of serviceability.
Handles all types of fibrous material including palm fronds
No flails or hammers to clog or jam while processing material
Carbon Steel Blades are reversible and can be resharpened
Fully protected crankshaft with 1350kg load rated bearing
Anti-Clog debris management system (Patented)
Handles material up to 20mm (Hopper)
Handles material up to 70mm (chipper tube)
No Mess Catching System Powder coated chassis
Hopper constructed in rust free Zincanneal® metal
Premium specification Briggs & Stratton engines 2 year machine warranty (conditions apply)